LN22043Q1
LN22043Q1
LN22043Q1 is a low quiescent current watchdog LDO with a wide input voltage range ​of 3V to 40V. The series provides 3.3V, 5V fixed outputs anddelivers up to 300mA output current. Typical and a dedicated BEN pin, VBAT sense function can be achieved by a minimum of peripheral circuit, shutdown current of LN22043Q1 is less than 1.5uA, while the quiescent current under no-load condition is 16μA.

Featues



Automotive


AEC-Q100 Grade 1 Qualified


LDO Function


Wide Input Voltage Range: 3V to 40V

Fixed 3.3V/5V Output Voltage, ±2% Accuracy
Up to 300mA Output Current
● Low Operation IQ: 16uA

● Low Shutdown ISHDN: 1.5µA

● Stable Control Loop with Wide range of 0.47uF to 200uF capacitance and 0Ω to100Ω ESR

● High PSRR 60dB @ 100Hz

● Accurate EN control


Watchdog Function


● Window Watchdog

● Adjustable Watchdog Timer


VBAT Sense Function


● VBAT UVLO: Open Drain Output to MCU interrupt

● VBAT Sense: Analog Output to MCU ADC sampling

● Dedicated BEN Pin to minimize system IQ


Protection Function


● VOUT OV/UV Detection

● Thermal Shutdown and Auto Restart

● Over-Current Protection


Device operating junction

temperature range


● –40°C to +150°C


Others


● DFN-EP12 Package with Wettable Flanks


Applications

(Automotive 12V System

Power Supplier)


● Infotainment(IVI)

● Body Control Module(Body)

● ADAS

● Power train






Description


LN22043Q1 is a low quiescent current watchdog LDO with a wide input voltage

range of 3V to 40V. The series provides 3.3V, 5V fixed outputs anddelivers up to

300mA output current. Typical and a dedicated BEN pin, VBAT sense function can

be achieved by a minimum of peripheral circuit, shutdown current of LN22043Q1 is

less than 1.5uA, while the quiescent current under no-load condition is 16μA.

Watchdog function can provide an independent monitor for microcontrollers.

Window watchdog mode can monitor whether the frequency ofwatchdog service

signal (WDI) is within a preset range. Different fault conditions of missing pulsein

open window and receiving pulse in close window can both be reported on RESET pin.

Theduration of watchdog window can be set by delay capacitor.

LN22043Q1 provides a battery voltage sensefunction. By integrating an independent

switch without sacrificing system quiescent consumption.

LN22043Q1 also features power good indicator, over current protection and over temperature

shutdown with auto restart. The product family are available in DFN-EP12 package with wettable

flanks.




Relevant Application